NEWS CENTER
PHENIX News & Drive Belt Knowledge
Company updates, exhibition reports and practical references for automotive and industrial drive belts.
PHENIX Annual Drive Belt Capacity Project Reaches Full Production
The expansion project reached full production with automated lines supporting output consistency and supply to global customers.
Read MorePHENIX Showcases V-Ribbed and Timing Belts at Automechanika Shanghai
ExhibitionsPHENIX Named a Zhejiang Specialized and Innovative SME
Company News 01Can an Existing Belt Be Replaced by Another Model? A Compatibility Guide Beyond Length
Check OEM and part references, length definition, section or tooth profile, pulley geometry, materials and operating conditions before approving a replacement.
Knowledge Center 02How to Match V-Belts, Timing Belts and V-Ribbed Belts to Pulleys
Identify the drive type, then match section, tooth pitch, rib count and pulley geometry to avoid incompatible substitutions.
Knowledge Center 03Is Belt Load Capacity Sufficient? Selection Checks for Drive Design
Assess power, speed, shock load, duty time, pulley size and operating conditions when reviewing a belt drive.
Knowledge Center 04Which Belt Material and Construction Fit Real Operating Conditions?
Compare temperature, oil, moisture, dust, bending and load requirements before selecting compounds and belt construction.
Knowledge Center 05How to Set Belt Tension, Dimensional Tolerance and Matched-Set Requirements
Review initial tension, alignment, pulley wear, dimensional tolerances and matched-set practice for installation.
Knowledge Center 06EPDM vs. CR Serpentine Belts: How to Choose for Automotive Accessory Drives
Compare EPDM and CR serpentine belts by temperature, ozone, oil exposure, noise, and replacement checks.
Knowledge Center 07Synchronous Belts vs. V-Belts: Choosing for Positioning or Power Transmission
Compare synchronous belts and V-belts by slip, positioning accuracy, pulley matching, maintenance, and selection criteria.
Knowledge Center 088M vs. 14M Industrial Timing Belts: Torque, Width, and Space Checks
Compare 8M and 14M pitch, torque, belt width, pulley envelope, load profile, and tooth-jump checks.
Knowledge Center 09OEM Belt Replacement Checklist: Part Numbers, Pulleys, Loads, and Operating Conditions
Check OEM belt application, geometry, pulleys, loads, environment, installation, and operating validation.
Knowledge Center 10Wrapped vs. Raw-Edge V-Belts: Heavy Loads, Dust, Bending, and Heat
Compare wrapped and raw-edge V-belts for dust, abrasion, power density, pulley size, bending, and heat.
Knowledge Center